Gearmatic 8A Winch Parts For Sale

Parts, Services, and For-Sale
Post Reply
User avatar
JDCrawlerdog3
40C crawler
40C crawler
Posts: 20
Joined: Sat Jan 02, 2016 11:47 am
Location: Vermont

Gearmatic 8A Winch Parts For Sale

Post by JDCrawlerdog3 » Sun Apr 15, 2018 6:08 pm

Gearmatic 8A winch parts for sale:

Gear Cover with Bearing Cap Screw – Good shape - $50.00
Clutch Cover with Bearing Cap Screw and Hydraulic Gland – Chip out at one bolt hole - $75.00
Clutch Bands – Both primary and secondary, need re-lining, bands in good shape - $20.00
Clutch Spider – Two clutch adjusting bolt holes need to be drilled and re-tapped, and two guide plate bolt holes need to be drilled and re-tapped, three clutch band guide plates included - $90.00
Clutch Lever Arm – Good shape, no cracks or welds - $100.00
Master Control – Housing only with cover, no cylinders, has internal lever and shaft - $75.00
Master Control Handle – Splines good. No rubber grip - $75.00
Brake Rod, Spacer Tube, Spring Saddle – Rough but serviceable - $20.00

PM me for pictures.

Thanks.

Andrew

jdtech
MC crawler
MC crawler
Posts: 1
Joined: Tue Feb 19, 2019 6:03 am
Location: Ontario

Re: Gearmatic 8A Winch Parts For Sale

Post by jdtech » Fri Feb 22, 2019 8:02 am

Some parts missing on my gearmatic 8A wondering if you still have parts available ?

User avatar
JDCrawlerdog3
40C crawler
40C crawler
Posts: 20
Joined: Sat Jan 02, 2016 11:47 am
Location: Vermont

Re: Gearmatic 8A Winch Parts For Sale

Post by JDCrawlerdog3 » Sat Feb 23, 2019 5:56 am

Jdtech,

PM me with a list of what you need. No longer have master control, handle or clutch lever arm.

Andrew

User avatar
Lavoy
Site Admin
Site Admin
Posts: 9551
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Gearmatic 8A Winch Parts For Sale

Post by Lavoy » Mon Feb 25, 2019 10:48 am

I have some new reproduction parts depending on what you need.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests