2010 engine clutch disc
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
2010 engine clutch disc
looking for a good source I called my local dealer and they said it's an obsolete part. there was one listed on Yesterday's Tractors but it was for a gas model I have a diesel with an HLR transmission. also what should I expect to pay?the dealer was able to get me an after-market one for it was over $200 I thought that sounded High.
IF Lavoy does not have a source for one theses guys should be able to reline yours http://www.clutchmasters.com/contact-us/ ...What is wrong with yours? with HLR on a 2010 you should never have to replace clutch unless maybe it got oil soaked
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Should be readily available rebuit or new. If you know the part number, e-mail it to me and I will check. Can't find my 2010 parts book right now.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
Ok, thanks for the information I have an operator's manual as well as the service manual I only drove it a little bit before I tore the engine out of it. actually the only thing I did with it was moving A lathe
I plan on reading up on it before I start actually using it I'm new to this stuff.
thanks for all the info and replies.
I plan on reading up on it before I start actually using it I'm new to this stuff.
thanks for all the info and replies.
Who is online
Users browsing this forum: No registered users and 77 guests