Ripper shanks 350C wanted

Parts, Services, and For-Sale
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Wed Jan 18, 2017 10:51 am

OH it looks to be factory built just for WHAT is the question?
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Wed Jan 18, 2017 11:21 am

More pics of both the ripper and front bucket ....Any tags???
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Thu Jan 19, 2017 7:53 pm

someone must have tried to post as this came up as new post today and it is not
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Sat Jan 21, 2017 3:13 am

jtrichard wrote:More pics of both the ripper and front bucket ....Any tags???
http://i61.photobucket.com/albums/h53/G ... snhjgm.jpg

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

JD 455E 1988

Post by gtb » Wed Jan 25, 2017 4:45 pm

https://i.ebayimg.com/00/s/ODUyWDExMzY= ... c/$_20.JPG

Appears to be the same ripper as whats fitted to my 350.

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Re: JD 455E 1988

Post by gtb » Wed Jan 25, 2017 5:03 pm


User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Wed Jan 25, 2017 9:25 pm

SURE looks to be the same.... I looked at a few hundred ripper pics and CANT find any others like those two
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Thu Jan 26, 2017 9:41 pm

jtrichard wrote:SURE looks to be the same.... I looked at a few hundred ripper pics and CANT find any others like those two
Maybe made in Australia

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Thu Jan 26, 2017 11:59 pm

IS that 455 down under also? probably is made there then
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Fri Jan 27, 2017 8:12 pm

jtrichard wrote:IS that 455 down under also? probably is made there then
Yes for sale in Sydney Australia.

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Fri Jan 27, 2017 8:26 pm

jtrichard wrote:IS that 455 down under also? probably is made there then
Yes its for sale in Australia. The Bucket on my 350 is made in Australian (8 meter cube)

Found this web sitehttps://www.yumpu.com/en/document/view/11477892 ... ompany/139

I was told I should get shanks laser cut and weld boots/teeth
cheers
Graeme

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Fri Jan 27, 2017 8:36 pm

gtb wrote:
jtrichard wrote:IS that 455 down under also? probably is made there then
Yes for sale in Sydney Australia.
Owner does not know the manufacture of the ripper.

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Sat Jan 28, 2017 9:06 pm

The link above works if you delete "site" off the front of the link.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Re: Ripper shanks 350C wanted

Post by gtb » Thu Sep 28, 2017 7:12 am

https://www.hltooth.com/wp-content/uplo ... rifier.pdf

Still looking for shanks purchased a T149204 off a JD607B/JD670CH Grader is a close fit. I will look at having some made.

Thanks for all your help.
Cheers

Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests