Ripper shanks 350C wanted

Parts, Services, and For-Sale
gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Ripper shanks 350C wanted

Post by gtb » Sat Jan 14, 2017 4:56 am

Hi

I have a JD350C Drott missing ripper shanks. It has provision for 3 shanks and it uses one hydraulic cylinder to operate ripper.

Any ideas where I can buy?

Or where I can obtain the measurements to have them made?

Hope you can help.

Regards
Graeme
gvauto@bigpond.net.au
Last edited by gtb on Sat Jan 14, 2017 11:30 pm, edited 1 time in total.

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1891
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sat Jan 14, 2017 8:49 pm

Need pics....... book shows A 3100 ripper used on 350C and that would have 2 cylinders and openings for up to 5 shanks they run about $200 each... Sounds like you have something else again need pics
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

Scottyb
2010 crawler
2010 crawler
Posts: 558
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Post by Scottyb » Mon Jan 16, 2017 8:59 am

I recently purchased 2 shanks for my ripper installed on my 350c. Deere had them in stock as well as the spring clips for adjusting them up or down. The cast wedges (about 4 inches long by an inch wide+-) that the spring clips attach too, are discontinued. Although, they are easily cut from an iron bar with one hole drilled and tapped for the clip, so just measurements are all you need. Yes, about 200 each including the hardened tip. I can send you photos and measurements if you want to make some.
Scott
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments

Scottyb
2010 crawler
2010 crawler
Posts: 558
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Post by Scottyb » Mon Jan 16, 2017 9:05 am

Follow up to my comment, my ripper has 5 holes for shanks as Jtrichard noted in his post. As does every deere ripper for 350 and 450s that I have seen.
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments

User avatar
shinnery
2010 crawler
2010 crawler
Posts: 715
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Mon Jan 16, 2017 9:07 pm

I wonder if he meant he has a Drott ripper, if there is such a thing.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Tue Jan 17, 2017 1:15 am

shinnery wrote:I wonder if he meant he has a Drott ripper, if there is such a thing.
http://i61.photobucket.com/albums/h53/G ... xlefjf.jpg

The neat hole size on ripper for shanks is approx 2 1/4inch thick, 5 1/4 long and pin size is 2inch.
cheers
Graeme

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Tue Jan 17, 2017 4:49 pm

New to this site. Keep getting DEBUG mode when posting. Appears to be a limit on text content.
Thank you all for your help.
Appears the rippers and bucket are made and not a factory fitment. Most likely overkill for this machine. Maybe common to other rippers.
cheers
Graeme

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1891
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Tue Jan 17, 2017 5:44 pm

HOLLY sheep shit that is NOT OEM for a 350 I will do some looking and see if I can match the measurement you gave ......
Last edited by jtrichard on Wed Jan 18, 2017 12:13 am, edited 1 time in total.
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1891
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Tue Jan 17, 2017 5:52 pm

GOTTA love debug
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Tue Jan 17, 2017 6:55 pm

jtrichard wrote:GOTTA love debug
It loves me!
Last edited by gtb on Tue Jan 17, 2017 9:32 pm, edited 1 time in total.

User avatar
shinnery
2010 crawler
2010 crawler
Posts: 715
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Tue Jan 17, 2017 8:08 pm

It has also managed to add 3 blank pages on this thread.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1891
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Tue Jan 17, 2017 10:03 pm

2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1891
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Wed Jan 18, 2017 12:11 am

With that BEAST on the rear you should not need any other counterweight

There is NOW a page 2
Last edited by jtrichard on Wed Jan 18, 2017 11:19 am, edited 2 times in total.
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Wed Jan 18, 2017 3:53 am

Wow how the hell did you find this information. Well done.
Maybe its a factory ripper.

gtb
40C crawler
40C crawler
Posts: 16
Joined: Tue Nov 15, 2016 1:01 am

Post by gtb » Wed Jan 18, 2017 3:54 am

jtrichard wrote:With that BEAST on the rear you should not need and other counterweight
Make a good boat anchor
Thank you
Cheers
Graeme

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest