How to contact Lavoy for parts.

Parts, Services, and For-Sale
Post Reply
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

How to contact Lavoy for parts.

Post by Lavoy » Tue Sep 03, 2019 4:08 pm

For anyone wishing to contact me for parts, my e-mail address is postmaster@jdcrawlers.com, phone is 701-361-1006. PM's are notoriously unreliable, and will often go unreceived on your end, so PLEASE, do NOT use the private message system to contact me for parts. I do not wish to be accused of not getting back to people, but once a PM is in my outbox, I have no control over it.
It is much better to call me, or e-mail me. I hate to beat the dead horse, but I delete a lot of unreceived PM's that I have sent to people, some going back months.
Thanks,
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

dirtguy34
420 crawler
420 crawler
Posts: 26
Joined: Sun Apr 12, 2009 6:47 pm
Location: maple city michigan

Cutting edge for {Peanut} JD 350 crawler Loader

Post by dirtguy34 » Sun Jun 05, 2022 8:51 am

Morning Lavoy; Been awhile ; Hope all is well, Looking for a weld on cutting edge w/ curl up ends for 350 JD Loader. cutting/ bucket width is 64.5 -65in wide. Wondering if you had one or any ideas as to get one or Just go with AR plate? Thanks for any ideas.
David F Kalena Maple City Michigan 49664

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: How to contact Lavoy for parts.

Post by Lavoy » Sun Jun 05, 2022 9:09 am

I don't have anything, but it is something that should be readily available so to speak. You may have to curl the ends yourself. Some steel supply houses carry cutting edge.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

dirtguy34
420 crawler
420 crawler
Posts: 26
Joined: Sun Apr 12, 2009 6:47 pm
Location: maple city michigan

Re: How to contact Lavoy for parts.

Post by dirtguy34 » Tue Jun 07, 2022 6:46 pm

Thank you for your time and responce. Appreicate it Dave

lmullenax@aol.com
MC crawler
MC crawler
Posts: 2
Joined: Sun Aug 07, 2022 9:38 pm

Re: How to contact Lavoy for parts.

Post by lmullenax@aol.com » Mon Aug 08, 2022 9:29 am

Just got registered on your site. I'm restoring a 1958 420C and need at least the following:

Ring gear (32 tooth) & pinion (7 tooth)
Cluster gear (43/26/19 tooth, M4205t I think)
Final drive pinion gear
Lower roller thrust plate (1)
Lower roller grease seals (not sure how many yet, would consider new or used)

Thanks,

Larry

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: How to contact Lavoy for parts.

Post by Lavoy » Mon Aug 08, 2022 12:32 pm

Larry,
Shoot me an email to postmaster@jdcrawlers.com
Thanks,
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

lmullenax@aol.com
MC crawler
MC crawler
Posts: 2
Joined: Sun Aug 07, 2022 9:38 pm

Re: How to contact Lavoy for parts.

Post by lmullenax@aol.com » Mon Aug 08, 2022 1:41 pm

I tried sending an email to the postmaster and it came back "undeliverable"

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: How to contact Lavoy for parts.

Post by Lavoy » Tue Aug 09, 2022 4:09 pm

Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests