Parts, Services, and For-Sale
-
Andy B
- 420 crawler

- Posts: 36
- Joined: Tue Jan 12, 2021 10:27 am
- Location: NE PA
Post
by Andy B » Tue Jan 04, 2022 6:18 pm
By chance is the donor crawler still around?
The reason I ask is because my 350B has a 3 pt hitch but I don't see any way to operate it. There is a Drott 4-in-1 bucket on it, with a separate control lever. There is no diverter valve to use the Drott lever to control the 3 pt.
In the 350B operator's manual it shows a different dual lever setup with two levers side by side with the right hand lever the control for the 3 pt.
I'd be interested in seeing what the valve looks like for the factory 3 pt setup.
1968 JD 350B diesel with Drott 4-in-1 Bucket
-
Lavoy
- Site Admin

- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Jan 04, 2022 9:50 pm
3PT valve is the Drott valve, someone has likely disconnected the 3PT to use that circuit to run the bucket.
lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
B Town
- 350 crawler

- Posts: 763
- Joined: Fri Dec 11, 2015 7:04 pm
- Location: Western Iowa
Post
by B Town » Mon Jan 17, 2022 4:40 pm
I’m interested in your 3 point pieces. I will send a PM, I would like to know what pieces you have available.
Thank you,
Bruce
Who is online
Users browsing this forum: No registered users and 3 guests