For sale: complete 3-point hitch like new (less upper link) - J.D. 350B. Excellent condition. Best offer. Ontario.
Came off the dozer in attached picture with only 1600 hrs on it. Dozer not for sale.
https://drive.google.com/file/d/1DerFRo ... sp=sharing
https://drive.google.com/file/d/16C_lTE ... sp=sharing
https://drive.google.com/file/d/1PJZyhk ... sp=sharing
J. Deere 350B: 3 point hitch for sale
J. Deere 350B: 3 point hitch for sale
Last edited by jfischer on Sun Nov 20, 2022 2:52 pm, edited 2 times in total.
Re: J. Deere 350B: 3 point hitch for sale
By chance is the donor crawler still around?
The reason I ask is because my 350B has a 3 pt hitch but I don't see any way to operate it. There is a Drott 4-in-1 bucket on it, with a separate control lever. There is no diverter valve to use the Drott lever to control the 3 pt.
In the 350B operator's manual it shows a different dual lever setup with two levers side by side with the right hand lever the control for the 3 pt.
I'd be interested in seeing what the valve looks like for the factory 3 pt setup.
The reason I ask is because my 350B has a 3 pt hitch but I don't see any way to operate it. There is a Drott 4-in-1 bucket on it, with a separate control lever. There is no diverter valve to use the Drott lever to control the 3 pt.
In the 350B operator's manual it shows a different dual lever setup with two levers side by side with the right hand lever the control for the 3 pt.
I'd be interested in seeing what the valve looks like for the factory 3 pt setup.
1968 JD 350B diesel with Drott 4-in-1 Bucket
Re: J. Deere 350B: 3 point hitch for sale
3PT valve is the Drott valve, someone has likely disconnected the 3PT to use that circuit to run the bucket.
lavoy
lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: J. Deere 350B: 3 point hitch for sale
I’m interested in your 3 point pieces. I will send a PM, I would like to know what pieces you have available.
Thank you,
Bruce
Thank you,
Bruce
Who is online
Users browsing this forum: No registered users and 64 guests