ISO Loader forks
ISO Loader forks
I am looking for loader forks for a john deere #90 loader or quiktach and maybe even a set I could modify to fit. it does need to have a backplate.
Re: ISO Loader forks
Are you replacing the bucket with forks or getting the ones that slide over the bottom of the bucket and clamp on? Lots of the clamp on type.
Re: ISO Loader forks
I will be taking the bucket off I am planning to haul up to 3000 pounds with it. Bucket clamp on forks wont hold up to the rough use compared to a set of forks with a frame
Re: ISO Loader forks
Possibly buy the front frame and forks off of a junkyard forklift? Wouldn't be to hard to adapt it to the loader frame.
Re: ISO Loader forks
That would work if I could find em
Re: ISO Loader forks
420/430
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: ISO Loader forks
If\when you get this made. Post how you do it. I have a 420 with loader that's on my list for the next rebuild and I might also like to use it for lifting with forks.
Re: ISO Loader forks
Ok I will try to! I hope to do it this year..
Who is online
Users browsing this forum: No registered users and 60 guests