Wanted JD 40C close to Ohio

[mc_mike]

I am looking for JD 40C to restore close to Ohio. If anyone knows where I can find one reasonable let me know.

Thanks,
Mike

[Magoo1]

Mike, I have one that I have not started work on. I found a 440 and have put the 40 on the back burner. It is a solid machine for a good start. It runs and steers. The tranmission sounds good. It does not jump out of gear.

The sheet metal is Fair(rusty), It was missing the Nose, so I used one from a tractor. I built a grill guard that covers most of the nose.

It smokes, I think it needs rings and or valve guides. It has good oil pressure.

It came with a "61"blade that is in poor condition.

It is a four roller, 1955.

If you are willing to make a long drive to Southwest Georgia. (almost Florida)

Let me know, I can sent pictures and more info.

Magoo

[Lavoy]

I know of one in SE Iowa, e-mail me if you want contact info.
Lavoy

[country53]

I know of a 420C in Cynthiana, Ky E mail me if interested

[mc_mike]

Thanks for the info, but I don't think I want to travel that far to find a crawler. I will keep looking and if anyone knows where I can find one a closer to Ohio, please let me know.

Thanks again,
Mike

[donol60]

I am looking for JD 40C to restore close to Ohio. If anyone knows where I can find one reasonable let me know.

Thanks, Hi, Mike, I have a JD 40c to sell w/blade, I live in Mich. can deliver to Ohio
Mike

[mc_mike]

I tried PM ing you but did not hear back. Please email me any pics, serial number, and what you are asking for it.

Thanks,
Mike
mkreh24@aol.com