Parts, Services, and For-Sale
-
Lostit
- MC crawler
- Posts: 9
- Joined: Tue Apr 05, 2005 4:40 pm
- Location: Laramie, Wy
Post
by Lostit » Mon Apr 30, 2007 9:50 pm
440 gas crawler, working and been used for plowing snow and road maintenance. Old but works! Contact by E-mail. Located SE Wyoming. Can provide pics on request. Best offer.
-
Lostit
- MC crawler
- Posts: 9
- Joined: Tue Apr 05, 2005 4:40 pm
- Location: Laramie, Wy
Post
by Lostit » Thu Nov 08, 2007 4:22 pm
Still have the 440 gas crawler for sale last person didn't show up all summer. Asking $4500 but will deal. Need to pass it on for a collector. Runs, works and needs a little TLC.
-
Stan Disbrow
- 350 crawler
- Posts: 2898
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Post
by Stan Disbrow » Tue Nov 13, 2007 9:41 am
Hi,
What model blade is on it? Might it be a mod 64 PAT?
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
-
440dozer
- 420 crawler
- Posts: 35
- Joined: Tue Nov 13, 2007 12:01 pm
- Location: sw missouri
Post
by 440dozer » Tue Nov 13, 2007 4:52 pm
would you consider trading for a tractor?
-
Lostit
- MC crawler
- Posts: 9
- Joined: Tue Apr 05, 2005 4:40 pm
- Location: Laramie, Wy
Post
by Lostit » Tue Nov 13, 2007 6:23 pm
6 way manual blade, I think it's a 62. 90"
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Nov 13, 2007 10:56 pm
Inside arm manual angle would be a 63, but the moldboard width sounds more like a 602, but that is only a 4 way. There was a later version that I have seen on 1010's that will tilt as well.
Lavoy
-
wwattson
- 1010 crawler
- Posts: 499
- Joined: Mon Aug 07, 2006 9:12 pm
- Location: West Bend, WI
Post
by wwattson » Wed Nov 14, 2007 6:47 am
The inside arm 6-way manual blade for a 1010 is a 610. It's almost identical to a 63 and shares most of the same parts but with different lift frames.
Bill Wattson
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Nov 14, 2007 8:54 am
I wonder if the outside arm tilt is not a 613.
Lavoy
-
Lostit
- MC crawler
- Posts: 9
- Joined: Tue Apr 05, 2005 4:40 pm
- Location: Laramie, Wy
Post
by Lostit » Mon Jan 28, 2008 6:46 pm
-
JD430C
- 1010 crawler
- Posts: 350
- Joined: Tue May 03, 2005 11:00 pm
- Location: Northfield, Vermont
-
Contact:
Post
by JD430C » Mon Jan 28, 2008 8:54 pm
hi, 440s and 1010s had an optional 90" blade for the inside push frame. my 1010 had one and i have seen a few 440s with them.
andrew
jds- 450B, 450C, 550, 4020, 3140 MFWD, 5200 MFWD
-
wwattson
- 1010 crawler
- Posts: 499
- Joined: Mon Aug 07, 2006 9:12 pm
- Location: West Bend, WI
Post
by wwattson » Mon Jan 28, 2008 9:13 pm
You're right Andrew. My parts book for the 610 blade lists an optional 90" blade in addition to the standard 72" blade.
Congrats on selling the crawler Lostit!
Bill Wattson
Who is online
Users browsing this forum: No registered users and 116 guests