Parts, Services, and For-Sale
-
jpotter53
- MC crawler
- Posts: 1
- Joined: Sun Jul 01, 2007 4:16 pm
Post
by jpotter53 » Wed Jul 04, 2007 12:51 pm
Looking for axle shaft pn t18278, bull gear t18281 and bearing and gaskets. Price on starter, gas engine. I have a 51,852 serial number crawler. Can you tell what year this is? Thanks Rick
-
wwattson
- 1010 crawler
- Posts: 499
- Joined: Mon Aug 07, 2006 9:12 pm
- Location: West Bend, WI
Post
by wwattson » Wed Jul 04, 2007 3:13 pm
Lavoy or Crawler Heaven should be able to help with the parts. As to the year, the weirddeere.com site shows that it would be a 1964. Hope this helps.
Bill Wattson
-
Lavoy
- Site Admin
- Posts: 10948
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Jul 04, 2007 5:01 pm
Other than the bearings and gaskets, those are hard parts to come by used, and there are no new.
Lavoy
-
JD430C
- 1010 crawler
- Posts: 350
- Joined: Tue May 03, 2005 11:00 pm
- Location: Northfield, Vermont
-
Contact:
Post
by JD430C » Wed Jul 04, 2007 10:20 pm
if thats a 64 1010 i probably have those final drive parts. if i remember i will check tomorrow.
andrew
jds- 450B, 450C, 550, 4020, 3140 MFWD, 5200 MFWD
-
donol60
- MC crawler
- Posts: 9
- Joined: Fri May 04, 2007 10:05 am
- Location: U.P. of Mich.
Post
by donol60 » Sat Jul 07, 2007 4:01 pm
I have an axel shaft that may fit, it is bigger than a 420 shaft, but don/t know what it fits no numbers on it, give me some specs and i will do some measuring.
old style straight blade
-
Joe Iannitto
- 420 crawler
- Posts: 38
- Joined: Mon Aug 14, 2006 5:22 pm
- Location: Phila PA
Post
by Joe Iannitto » Mon Jul 09, 2007 5:11 pm
Rick,
I just replaced my starter on a gas 1010. Napa has the starter NAPApart number 91-01-3969. The cost was $165 with a $45 core charge. It is a Wilson re manfactured starter.
Joe
Who is online
Users browsing this forum: No registered users and 148 guests
