New undercarriage now available

[Lavoy]

Okay, several of you have asked about new undercarriage in the past, and I have just not a had a good supplier to work with. I finally have one supplier on board, and am working on another, should know more in a couple of weeks.
Anyhow, if you are in need of any new undercarriage, let me know. This will be for 350 and later as far as rails, but will have new replacement rollers for 40 on up, and new pads for 1010/2010 on up. Also if you are looking at converting an older crawler to 350 rails and pads, we can do that. I don't have a good source for 350 sprocket rims yet, but am working on it.
Lavoy

[sam]

Lavoy,
I need five new rollers for my 440. I plan to go to 350
rails in the future. Can I change rollers now and rails later?
I know I'll need to re-rim sprockets. How much are new rollers?

[Lavoy]

Sam,
The new style rollers work fine with the old rails, just put a set on the 420 loader in the Show and Tell section, going to put a set on my 440 if I ever get to work on it. Price will vary depending on brand I get, and whether 1/2" or 9/16" bolt holes. Ballpark is $125/each.
Lavoy