1010 final drive parts for sale

cat10til2 · Post by **cat10til2** » Mon Jan 28, 2008 10:50 am

Hi all- I have the following parts for sale for a 1010:
1- late model final drive housing...no cracks or welds- $125.
1- early model final drive housing...no cracks or welds- $125.
1- early model complete final drive (needs new bearings / seals) $400.
1- early model axle-$100.
1- late model axle $100
1- early model bull gear, 56 tooth, good rim, needs new center- $25.

all parts located in northern NY

thanks
cat10til2

sam · Post by **sam** » Mon May 19, 2008 4:09 pm

do you still have the early 1010 axle? If you do how long is it?
sam

cat10til2 · Post by **cat10til2** » Fri May 23, 2008 5:15 am

Sam- I still have the axle, it measures about 12 inches long, including the 3 bolts for the sprocket to bolt to.

thanks
cat10til2

the bullgear is gone...all other parts still available

sam · Post by **sam** » Fri May 23, 2008 12:07 pm

Thats wonderful I'm going to measure mine. I,m trying to fit it on a late production 440ICD. How for off could your measurement be you said about? AND What about the condition of the splines? Do you have any idea how much to get it to louisana?
Everyone I talk to saids they might be the same as mine but no one is for sure. I think I'm going to try it.I have to do somethig when this machine is down I get depressed.
Sam

cat10til2 · Post by **cat10til2** » Fri May 23, 2008 12:12 pm

splines look good. I will take a pic of it and send it to you. As far as the measurement, it is within 1/16th of an inch.

cat10til2

sam · Post by **sam** » Tue May 27, 2008 3:31 pm

I sent (pm) the info let me know if you didnt get it.
sam

cat10til2 · Post by **cat10til2** » Wed May 28, 2008 7:56 am

Sam- the PM didn't come through...I sent you one with my e-mail

thanks
Andy

JDcrawlers Messageboard

1010 final drive parts for sale

1010 final drive parts for sale

parts

axle

axle

info

Who is online