I removed a 6 way blade (not sure of the brand) off my 5 roller 420C.
When the blade is raised up all the way, the bottom of the blade is almost 6 feet off the ground. 2 hyd cylinders for up/down, one hyd cylinder for tilt, there are wings on both sides of the blade. Blade is at least 6 feet wide.
Blade has a home made brush rake.
Hydraulic valves included.
Blade is located in Shelton WA 98584
Please email me at StaceyJan@aol.com for pictures.
Brian
For sale: 6 way blade with power tilt, wings on both sides
more stuff for sale
I have been talking with Lavoy and he thinks the blade is a Northwestern Power Equipment blade. I would like 1500 or best offer...
I have also decided to sell a # 63 manual 6 way blade off a 440 IC that I am parting out, asking 2200 or best offer...
Also a 3 pt hitch off a 420C (no top link) 1000 or best offer...
I still have a 5 speed transmission, the center section with reverser, and a final drive and a sprocket off a 440 IC s/n 440321 that I would like to sell...
I've got lots of pictures if you are interesetd. please email me at
StaceyJan@aol.com
Thanks
Brian
I have also decided to sell a # 63 manual 6 way blade off a 440 IC that I am parting out, asking 2200 or best offer...
Also a 3 pt hitch off a 420C (no top link) 1000 or best offer...
I still have a 5 speed transmission, the center section with reverser, and a final drive and a sprocket off a 440 IC s/n 440321 that I would like to sell...
I've got lots of pictures if you are interesetd. please email me at
StaceyJan@aol.com
Thanks
Brian
Who is online
Users browsing this forum: No registered users and 181 guests