Parts, Services, and For-Sale
-
Pat
- 440 crawler
- Posts: 144
- Joined: Thu Dec 08, 2005 9:14 am
- Location: Jacksonville NC
Post
by Pat » Mon May 12, 2008 11:51 am
Lavoy, are you or anyone else making wedges for the angle function on a 62 blade? Anyone have some spares? Pat
-
Lavoy
- Site Admin
- Posts: 10948
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon May 12, 2008 5:02 pm
No one that I know of is making them. It would not be that difficult to do, but you would need a laser that would do 1" plate. I might be able to get them plasma cut, but the definition is not as nice as I would like it to be.
Lavoy
-
Pat
- 440 crawler
- Posts: 144
- Joined: Thu Dec 08, 2005 9:14 am
- Location: Jacksonville NC
Post
by Pat » Mon May 12, 2008 5:13 pm
Thats the problem around here locally. No capability, without a LOT of grinding!
-
dale
- 420 crawler
- Posts: 45
- Joined: Tue Jan 22, 2008 7:51 am
- Location: Southern Md.
Post
by dale » Tue May 13, 2008 6:03 am
If you have a drawing and dimensions, you can send this guy a request. They do laser, cnc, flame, etc.......
tony james
tjames@olp.net
-
country53
- 440 crawler
- Posts: 111
- Joined: Thu Apr 07, 2005 12:59 pm
- Location: Kentucky
Post
by country53 » Tue May 13, 2008 7:23 am
I made mine for my 420. I used SAE 4140 cut em out on a mill and heat treated to make them hard. Have worked well for me. If you make a glancing blow they throw some nice spark like the factory orignal did.
Who is online
Users browsing this forum: No registered users and 141 guests
