420 water temp

bulldozerman · Post by **bulldozerman** » Sat Aug 16, 2008 12:53 pm

i was wndering if you had a water temperature gauge for my 420c, and if you do, what are the chances that the sensor actualy works?
Thanks Branden

Post by **Lavoy** » Sun Aug 17, 2008 11:50 am

I have new OEM, new repro, and new replacement gauges, not all on hand at this moment. Give me a call or e-mail if you are still looking for one.
Lavoy

bulldozerman · Post by **bulldozerman** » Sun Aug 17, 2008 12:37 pm

I am looking for one, so let me know when you can get one, and how much it will be.
Thanks
Branden

Post by **Lavoy** » Sun Aug 17, 2008 8:51 pm

I will need to double check on pricing, but depending on which one you want, $20-$135. Only one I have on hand is an aftermarket generic face, $20.
Lavoy

bulldozerman · Post by **bulldozerman** » Mon Aug 18, 2008 9:59 am

The gauge that you have fits in the orginal slot on the "contoll board" on the dozer, or do i have to mount it somewhere else?

Post by **Lavoy** » Mon Aug 18, 2008 11:05 am

Nope, goes right in the original location, exact same principal as the original gauge, but the face will be different than original.
Lavoy

bulldozerman · Post by **bulldozerman** » Mon Aug 18, 2008 7:40 pm

If the $20 setup that you have comes with everything that i need, ill take one as soon as you can get one.
Thank You
Branden

Post by **Lavoy** » Tue Aug 19, 2008 8:01 am

Okay, send me an e-mail with your address and such.
Lavoy

JDcrawlers Messageboard

420 water temp

420 water temp

Who is online