440 ICD Parts

Keith · Post by **Keith** » Mon Aug 10, 2009 1:45 pm

I recently picked up a 440 with a 2-53 Detroit diesel that I am taking the undercarriage from to put on my 420 and do not need the rest. The engine runs, machine is basically complete and has decent tin, but the transmission is broken in half. It is a crawler loader with the model 831 loader.

Let me know if anybody needs anything from it.

I also have a set of older 350 rollers with the grease fittings that are worn but still usable.

Keith

carolina crawler · Post by **carolina crawler** » Tue Aug 11, 2009 4:41 pm

hey man, would you sell me the front engine mounts and the exhaust manifold if still ok,,,,,,,,,I also has a couple of 440s a diesel and a gas, i am rebuilding the D.....pics of it are on the site, just old.......let me know,,mark in ga..cell 404-579-7760 call, email or text

BKahler · Post by **BKahler** » Tue Aug 18, 2009 3:26 am

Keith wrote:I recently picked up a 440 with a 2-53 Detroit diesel that I am taking the undercarriage from to put on my 420 and do not need the rest. The engine runs, machine is basically complete and has decent tin, but the transmission is broken in half. It is a crawler loader with the model 831 loader.

Let me know if anybody needs anything from it.

I also have a set of older 350 rollers with the grease fittings that are worn but still usable.

Keith

Keith,

Would you happen to have the shrouds or guards for the 440ICD that go on top of and beside the radiator?

I'm in need of those if you have them available.

Thanks!

Brad

BKahler · Post by **BKahler** » Tue Aug 18, 2009 5:43 am

Keith,

One other item I need is the governor guard/cover. There are two different covers, early & late. I need the later style as mine is a later serial number machine.

Thanks!

Brad

tuney443 · Post by **tuney443** » Fri Sep 04, 2009 7:21 pm

How is the reverser?What would you want for it if it's alright? Thanks.

thomas72 · Post by **thomas72** » Tue Sep 08, 2009 9:44 am

If only you were closer, I'd buy the loader from you.

whiteclipse16 · Post by **whiteclipse16** » Tue Mar 30, 2010 7:36 pm

If you still have stuff I may be interested in the foot plates.

tuney443 · Post by **tuney443** » Sun Apr 11, 2010 1:45 pm

Do you still have any parts left?

Keith · Post by **Keith** » Tue Apr 27, 2010 10:57 am

I still have several parts left - to recap

831 Loader, has good cylinders and control valve, worn but not worn out. Loader frame has some welds, but arms and linkages are good.

Complete 2-53 Detroit motor (had some interest but no firm takers yet)

Sheet metal

Basically a complete machine minus the undercarriage. Transmission is shot and it seems the reverser was disconnected a long time ago.

Send me a PM with what you are interested in.

Thanks,

Keith

430WLPG · Post by **430WLPG** » Wed Apr 28, 2010 8:54 pm

Keith
I'm looking for the RH side final drive, Do you still have it?

JDcrawlers Messageboard

440 ICD Parts

440 ICD Parts

440 engine

Re: 440 ICD Parts

Who is online