FOR SALE JD 350 Crawler

jsolomon · Post by **jsolomon** » Mon Oct 18, 2010 5:39 pm

For Sale , 1966 ( I think) Ser # 023835T 350 crawler in fair shape. I bought it several years ago, and used it to do some work on my lot. Hasn't run in about a year and 1/2 ,needs a muffler and probably the carb needs cleaning. Has a 3 cyl. gas engine,winch,6 way mech. blade, full roll cage. Wife says it has to go

,I don't have time to fix it right now, Will make some one a great project machine. Help me out. Asking 4000.00 dollars US , E-mail me for pics jsolomon@midmaine.com

KenP · Post by **KenP** » Tue Oct 19, 2010 4:20 am

deleted

jsolomon · Post by **jsolomon** » Tue Oct 19, 2010 4:46 am

I wish I could ,or had the time to get it running. Everything worked when I ran it last. I let it set all winter

and in the spring it didn't want to start,stale fuel,then my wife and I had another baby and I have been busy all summer remodeling the house.Now work is getting busy and I only have sundays off to work around the house and spend time with the wife and kids. Anyone with some time is more than welcome to come and get it running b4 they buy it. I just said I was asking 4k, will take offers,and it you saw it ,I think you would agree its worth the money,its not junk. Thanks for reading my post.

Stan Disbrow · Post by **Stan Disbrow** » Tue Oct 19, 2010 5:54 am

Hi,

Maw dang. If you were closer, I'd come over and get it going. But, ME is a tad too far from NC.....

BTW, the blade, is that and inside-mount or an outside-mount manual angle/tilt blade?

Later!

Stan

jsolomon · Post by **jsolomon** » Tue Oct 19, 2010 4:49 pm

Inside blade,and yes the tilt and angle are manual. Up and down are hyd. Thanks for your interest, and yes NC is a ways from ME

jsolomon · Post by **jsolomon** » Fri Nov 05, 2010 4:57 pm

If you want to see a pic of this dozer go to http://www.themainemarketplace.com/categories/view/47 and look for John Deere 350 crawler I have reduced my asking price to 3500.00 if someone will take it b4 it snows.

JWB Contracting · Post by **JWB Contracting** » Tue Nov 09, 2010 2:07 pm

I would pay $3,500 if it wasn't 1,000 miles away and would either wreck it or fix it. If i had this unit running and moving in Edmonton Alberta i would be asking $8K for it and would probably get it as soon as it snows. Maybe there are just more crawlers down south... There are very few available for sale here so when they do sell you get a good price.

CECILDYKES · Post by **CECILDYKES** » Fri Feb 25, 2011 9:22 pm

I AM A NEW MEMBER,HOW DO YOU POST EITHER FOR SAL OR WANTED.
THANKS FOR YOUR HELP.
CECIL DYKES

shinnery · Post by **shinnery** » Fri Feb 25, 2011 9:29 pm

At either the top or bottom of this page on the left side of the page is a button marked new topic. Click it and start typing.
Bryce

JDcrawlers Messageboard

FOR SALE JD 350 Crawler

FOR SALE JD 350 Crawler

350 for sale

If it were closer...

Who is online