Various 2010 Diesel parts for sale

Parts, Services, and For-Sale
Post Reply
User avatar
Stretch
440 crawler
440 crawler
Posts: 200
Joined: Mon Feb 19, 2007 6:48 pm
Location: Albemarle, NC

Various 2010 Diesel parts for sale

Post by Stretch » Sun Apr 03, 2011 6:12 pm

I have various parts for a 2010 late model ( serial #42001 and up ) for sale.
Sprocket
Transmission complete $200
engine block (magna-fluxed and cam bearings installed) $150 sold
crank shaft (magna-fluxed and turned) $150 sold
cylinder head (magna-fluxed and rebuilt) $400 sold
liner (magna-fluxed and honed) $150 sold
pistons $75 for all sold
rods $50 for all sold
fuel tank $50 sold
Injector pump $75 sold
bearings to match crank and rods $50 sold
gasket set sold
And other items
If you need something that's not listed message me and I will see if I have it.
Machine will be scraped soon.
Last edited by Stretch on Sun May 08, 2011 4:33 am, edited 2 times in total.
2010C Dozer, 2010C Loader
If at first you don't succeed, get a bigger hammer.

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Sun Apr 03, 2011 10:57 pm

Curiosity only. Is Liner another name for the Sleeve Deck?
Bryce
:)
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
Stretch
440 crawler
440 crawler
Posts: 200
Joined: Mon Feb 19, 2007 6:48 pm
Location: Albemarle, NC

Post by Stretch » Mon Apr 04, 2011 2:11 am

yes
2010C Dozer, 2010C Loader
If at first you don't succeed, get a bigger hammer.

2010OWNER
440 crawler
440 crawler
Posts: 103
Joined: Wed Apr 06, 2005 3:27 am
Location: Matlock, Washington

2010 parts for sale

Post by 2010OWNER » Tue Apr 05, 2011 10:24 pm

Is the sprocket near new? I'm running mis-matched sprockets on a new chain as I could only get one new sprocket.
Brian
'63 2010 Dozer, '44 Model B Tractor,'65 2010 Tractor, '55 40c crawler, '77 2240 Orchard Tractor.

User avatar
Stretch
440 crawler
440 crawler
Posts: 200
Joined: Mon Feb 19, 2007 6:48 pm
Location: Albemarle, NC

Post by Stretch » Wed Apr 06, 2011 2:56 am

I will have to go gauge it again. If my memory serves me right i checked it before and it was real close to my gauge. (I made a gauge pattern from a new sprocket a few years back)
Stretch
2010C Dozer, 2010C Loader
If at first you don't succeed, get a bigger hammer.

User avatar
CHA011
420 crawler
420 crawler
Posts: 35
Joined: Fri Oct 30, 2009 4:40 pm
Location: northeast PA

2010 parts

Post by CHA011 » Wed Apr 13, 2011 7:25 pm

I MIGHT be interested in engine block, sleeve deck and stuff. 5706221289 I do not get your email to work. Is it 165 diesel?

User avatar
CHA011
420 crawler
420 crawler
Posts: 35
Joined: Fri Oct 30, 2009 4:40 pm
Location: northeast PA

various 2010 parts

Post by CHA011 » Thu May 19, 2011 9:44 am

Lavoy
I have e-mailed this gentle men concerning possiblities, but the e-mails return
not deliverable. Is there a way I could speak to him/make connect with him??

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Thu May 19, 2011 10:26 am

At the bottom of any of his posts there is a button that says PM. That is for sending a private message within the message board's message system, you could try that.
Lavoy

Post Reply

Who is online

Users browsing this forum: No registered users and 46 guests