420 crawler fresh in for parts

Post by **Lavoy** » Sat Jul 14, 2012 2:14 pm

Just got in a 420 crawler for parts. Several of you have been asking for some parts I was out of, but now I have them in stock.
The crawler is a 1957 5 roller, 5 speed crawler. Appears to have 10 recent rollers under it, so I now have rollers in stock again. Crawler has excellent fenders, and new repro battery sheetmetal on it. Hood is good, grille is junk.
10" track pads on decent rails, but pins and bushings worn. Engine runs good, will be out of the crawler by next week.
I also got a set of counterweight brackets and a full weight set, I know someone had contacted me about weights in the past, but I was out.
Anything you need, call or e-mail, and I will check on it.
Lavoy

Steven Walters · Post by **Steven Walters** » Sun Jul 15, 2012 8:46 am

I'll take the fenders and hood.

Post by **Lavoy** » Sun Jul 15, 2012 11:06 am

Replied to your PM a little bit ago.
Lavoy

Post by **Lavoy** » Sun Jul 15, 2012 11:14 am

Got the crawler mostly down last night.
All 10 bottom rollers have been replaced and are like new. Sprockets are decent, no where near new, but would run a long time. Front idlers, brackets and springs are good, bushings and shafts appear to be worn. Final cases are good, and are the later style case with the bump on the pinion shaft area.
Battery sheetmetal is new, and recently installed. Has new seat cushions, seat frame is pretty good, base is perfect, slide is garbage.
Thanks for all the inquiries, I will respond to e-mails and PM's as I get farther into the crawler.
Lavoy

Post by **Lavoy** » Wed Jul 18, 2012 8:00 pm

Fenders are sold, thanks.
The engine is now available again, buyer decided to try and rebuild his own instead, so no longer wants it.
Lavoy

Post by **Lavoy** » Sat Jul 21, 2012 8:56 pm

Trackframes, rollers and rockguards sold, thanks.
Lavoy

jdcollector · Post by **jdcollector** » Thu Jul 26, 2012 10:17 pm

Do you happen to have a set of good fenders off of it or a 4 spool valve?

Post by **Lavoy** » Fri Jul 27, 2012 9:44 am

Fenders are sold, no hyd on this crawler, sorry.
Lavoy

jdcollector · Post by **jdcollector** » Fri Jul 27, 2012 7:16 pm

CRUD... if anyone out there has a set of fenders or a 4 spool valve for a 420C let me know. Thanks!

sandman · Post by **sandman** » Fri Aug 31, 2012 6:38 am

585-771-7936

scotty · Post by **scotty** » Thu Sep 20, 2012 5:47 am

Hi Lavoy , we are still looking for 1st gear for a 1957 5 rollor 420, if you have one that is in real good shape let me know. Thanks Randy

Post by **Lavoy** » Thu Sep 20, 2012 8:40 am

Randy,
Need to know 4 or 5 speed, and serial number. Shoot me an e-mail with the details and I will check.
Lavoy

bitcoder · Post by **bitcoder** » Tue Oct 02, 2012 4:30 pm

Lavoy,

I need a transmission for 440 gasser, preferably 5-speed with reverser.

Post by **Lavoy** » Wed Oct 03, 2012 9:23 am

What serial number or is it large or small transmission?
Lavoy

rick22 · Post by **rick22** » Sat Nov 03, 2012 1:43 pm

looking for a gas tank. Can you email me at rrivera@hydro.mb.ca.
thanks
Rick

JDcrawlers Messageboard

420 crawler fresh in for parts

420 crawler fresh in for parts

parts

Engine or engine Block , I have a cracked cyl, 420c late

JD440 transmission

Gas Tank

Who is online