guage
-
- MC crawler
- Posts: 4
- Joined: Wed May 02, 2012 7:22 pm
guage
does john deere or anybody else make guage for checking the tracks and or sprockets for wear on john deere track machines, thanks
They used to, but they are obsolete now. On occasion you will see one on Ebay, but it has been years since I saw one.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
The laser cut is the easy part, it is all the inscriptions and measurements that are on both sides. It could be laser engraved, but would take a lot of time.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
I have all of that type of equipment available to me, all I need a drawing! Lets get this going! Who has the specifications??????Lavoy wrote:The laser cut is the easy part, it is all the inscriptions and measurements that are on both sides. It could be laser engraved, but would take a lot of time.
Lavoy
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.
I have the two cylinder and the 350 gauges somewhere, I will see if I can find them.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Hello all, I am getting very close to finally 're-producing these track wear gauges. There will be two gauges, one is to be used on the 40's 4 roller,420,430,440,1010,2010-serial 42,000. The other gauge will be for the 2010's after 42,001 and 350's. The track wear gauge measures the grouser height, pin to pin wear, support idler wear, roller radius and wear between the flanges, front idler radius, minimum track sag, drive sprocket wear, and link wear. Most of these measurements are compared to the new part, so you would compare this to your profiles. The question I have is how many of you would be interested in either of the gauges for somewhere around 30.00 to 35.00 each, shipping is included. I need to get one more quote in before I can set the final price.
Last edited by notmeu on Fri Mar 01, 2013 1:04 pm, edited 1 time in total.
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.
- Tractor 850
- 430 crawler
- Posts: 83
- Joined: Sun Feb 17, 2008 1:46 pm
- Location: New Jersey
-
- 2010 crawler
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Ready for shipping
I would take 2 of each size of gauge if there ready.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
Who is online
Users browsing this forum: No registered users and 68 guests