For sale or parting out 440ICD with power 6 way blade

Post by **Lavoy** » Mon Apr 01, 2013 2:55 pm

For sale or going to part out, 440 diesel crawler, 5 speed, reverser, 64 power 6 way blade. Good old crawler, I just will never get it done, time to quit fooling myself. Call or e-mail for more info.
Lavoy

whiteclipse16 · Post by **whiteclipse16** » Tue Apr 02, 2013 5:55 am

I call dibs on the oil pressure and water temp. gauges if they are the originals and in working order.

Steven Walters · Post by **Steven Walters** » Tue Apr 02, 2013 6:07 am

Is there a rear skid plate on it?

ktheaker · Post by **ktheaker** » Tue Apr 02, 2013 9:17 am

i am interested in the hydrolic valve and small tilt cyl inder if you are parting .

Post by **Lavoy** » Tue Apr 02, 2013 9:35 am

No rear pan, but I might have one. Gauges are junk, but trying to get new repro's made, should know more end of the month.
Blade is a complete excellent blade, will have to sell whole, sorry.
Lavoy

ktheaker · Post by **ktheaker** » Tue Apr 02, 2013 9:44 am

complete set up is worth ? but i have to say i do have 90% i bought off a member a bit ago and i wondered then if i should have bought a complete set up . so here i am

scampr · Post by **scampr** » Tue Apr 02, 2013 2:21 pm

do you think the direction reverser is ok, i would need everything including linkage since this one never had one... can you send me a price on that and the sliding second and reverse gear if you have got access to the barn yet i dont think you would want to open that trans up for just that gear. mine is the 440ICD i asked you about a while ago... # 453316 scampr68@yahoo.com. I hate to imagine the shipping cost to NH

but so far no luck with anyone in Vt yet. Thanks lavoy

Post by **Lavoy** » Tue Apr 02, 2013 3:29 pm

Just sent you an e-mail.
Lavoy

scampr · Post by **scampr** » Tue Apr 02, 2013 4:47 pm

I got it, thanks, will try to call him again.. thanks again..

JWB Contracting · Post by **JWB Contracting** » Wed Apr 03, 2013 8:11 pm

I have been looking for a 440 with a six way dozer. Distance isn't the deciding factor, I just purchased a fairly rare Deere wheel tractor and haven't even got it home yet. I better get some of my current projects completed before buying any more.

I'm also going to have to give my dad a hand with some of his projects. He's got 4 or more non-running MC's, a TD35 with a tight engine, Hough crawler loader with a bad engine, tranny in an MT plus a few other Deere tractors pulled down for rebuild. We need to get at them or part with them as they will spoil from sitting.

I'll post some before and after pics once we get going on them.

scampr · Post by **scampr** » Fri Apr 05, 2013 3:13 pm

I finally talked to Jay today... nice guy and i think he can help me out.. Thanks for the lead and i'll let you know how i make out. Thanks again

Post by **Lavoy** » Fri Apr 05, 2013 3:23 pm

Okay, good.
Lavoy

pop pop · Post by **pop pop** » Sat Apr 06, 2013 8:30 pm

geez Lavoy, no sense in being rational about it, haha. hope its not catching.

Post by **Lavoy** » Sat Apr 06, 2013 9:16 pm

I have had a 420 sitting in the shed for 5 years or more that I wanted to do for myself, and not getting any closer on that one. Plus, got two 440's coming in for complete restorations this summer, and maybe more after that.
I have a late, late 440 gas in the shop now for mechanical work, but no cosmetics, that will be my user until I get more time, haha. Plus, thinking the money might be better spent on a loader to make my life a little easier, and the honeydo list a little shorter.
Lavoy

Post by **Lavoy** » Mon Apr 08, 2013 4:12 pm

Crawler is sold, thanks.
Lavoy

JDcrawlers Messageboard

For sale or parting out 440ICD with power 6 way blade

For sale or parting out 440ICD with power 6 way blade

440 parting out

440 part out

If only it were closer

Who is online