Anyone know where I can find a throttle cable for my 450??. I recently purchased the machine, but found the cable is seized/rusted pretty bad.
I get very little movement to the pump.
Looking for JD450 throttle cable
Unless you can find something like a PTO cable at a truck shop that will work, pretty much a Deere only item that I know of.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Here are some cables that you maybe able to match up to http://www.ebay.com/itm/Steinjager-J001 ... 04&vxp=mtr (change to your ends)
JD part # AT 105279 ... is 48" long and #AT 83335 ...60"
YOU can also Google the JD #s and a lot come up also you can have them made to order
also MCmaster carr has them http://www.mcmaster.com/#push/pull-cont ... le/=wmx1x2
JD part # AT 105279 ... is 48" long and #AT 83335 ...60"
YOU can also Google the JD #s and a lot come up also you can have them made to order
also MCmaster carr has them http://www.mcmaster.com/#push/pull-cont ... le/=wmx1x2
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
- 2010 crawler
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Cable repair
I attach a hose over one end of the cable and clamp it down with a hose clamp, spray in some fluid film and then insert and clamp down our air blower nozzle and apply some pressure. I go from the pump end. You know it's working if it takes more air after sitting over night. Will not fix all cables. I have 2 machines on deck that will get this treatment shortly.
Normally the cables just get rusted up. My dad would soak the cables in oil, but this is much faster. About half of the machines we get in have sticky throttle cables. Much quicker and cheaper than replacement.
After market cables often require building a new mount for the pump end but can be done. I have even seen choke cables used.
Normally the cables just get rusted up. My dad would soak the cables in oil, but this is much faster. About half of the machines we get in have sticky throttle cables. Much quicker and cheaper than replacement.
After market cables often require building a new mount for the pump end but can be done. I have even seen choke cables used.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
Who is online
Users browsing this forum: No registered users and 88 guests