3-pt hitch scarifier

Discuss non-crawler related issues here (keep it sane, please)
Post Reply
User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

3-pt hitch scarifier

Post by Paul Buhler » Wed Aug 03, 2016 11:02 am

Found this. I forgot which discussion this might fit.
https://vermont.craigslist.org/grq/5702662171.html
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Wed Aug 03, 2016 1:55 pm

Handy rig on a 3PT crawler. Pretty much same concept as the Deere scarifier.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Wed Aug 03, 2016 2:07 pm

Hi,

I was talking about such things, and I can't recall which thread that was, either.....

Ironically, here is the one for the later crawlers just listed today on the Bay....

http://www.ebay.com/itm/Cat-Case-JD-Joh ... SwhOdXohCv

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Wed Aug 03, 2016 2:47 pm

Yeah, may somehow be made to fit a Deere, but I think they are fibbing, not near enough components there.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Wed Aug 03, 2016 3:38 pm

Hi,

I think they pulled about half of it off, actually.

But, since this thread popped up today, and that auction popped up today as well, I thought they went pretty well together.

And someone might just need the bits which are there. Maybe the guy that bought the crawler with the other half still attached. :P

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Wed Aug 03, 2016 5:37 pm

NOT off of deere at least nothing 2010 or after might be OLDER case I say older because of the BOLT together cylinders
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests