Found this. I forgot which discussion this might fit.
https://vermont.craigslist.org/grq/5702662171.html
3-pt hitch scarifier
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
3-pt hitch scarifier
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Handy rig on a 3PT crawler. Pretty much same concept as the Deere scarifier.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Stan Disbrow
- 350 crawler
- Posts: 2899
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
I was talking about such things, and I can't recall which thread that was, either.....
Ironically, here is the one for the later crawlers just listed today on the Bay....
http://www.ebay.com/itm/Cat-Case-JD-Joh ... SwhOdXohCv
Stan
I was talking about such things, and I can't recall which thread that was, either.....
Ironically, here is the one for the later crawlers just listed today on the Bay....
http://www.ebay.com/itm/Cat-Case-JD-Joh ... SwhOdXohCv
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Yeah, may somehow be made to fit a Deere, but I think they are fibbing, not near enough components there.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Stan Disbrow
- 350 crawler
- Posts: 2899
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
I think they pulled about half of it off, actually.
But, since this thread popped up today, and that auction popped up today as well, I thought they went pretty well together.
And someone might just need the bits which are there. Maybe the guy that bought the crawler with the other half still attached.
Stan
I think they pulled about half of it off, actually.
But, since this thread popped up today, and that auction popped up today as well, I thought they went pretty well together.
And someone might just need the bits which are there. Maybe the guy that bought the crawler with the other half still attached.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: No registered users and 57 guests