So many disjointed posts on photo posting I gave up. How about a single post with 1, 2, 3, 4, type steps. No extended explanations.
I metal detect and have dug up 3 machine parts. I have no idea what they are and thought I'd post a photo here in hopes someone could identity them.
Anyone post a photo for me?
photo posted now
photo posted now
Last edited by gus on Sun Nov 10, 2019 11:28 am, edited 1 time in total.
Re: Need photo posted
gus,
Check you PMs.
Jim
Check you PMs.
Jim
Re: Need photo posted
Thanks for the help!!
Re: photo posted now
Did some cleaning on the bottom one, with round ends. Those round parts are welded on, very poor sloppy looking welds. They look like they were welded onto one with the star shape. 6 5/8" diameter on the top 2 and 7 3/4" on the round ended one. They are castings, 1 1/8" bore, look like held on with a shear pin or hard pin.
Who is online
Users browsing this forum: No registered users and 50 guests