photo posted now

Discuss non-crawler related issues here (keep it sane, please)
Post Reply
gus
2010 crawler
2010 crawler
Posts: 695
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

photo posted now

Post by gus » Sat Nov 09, 2019 12:03 pm

So many disjointed posts on photo posting I gave up. How about a single post with 1, 2, 3, 4, type steps. No extended explanations.

I metal detect and have dug up 3 machine parts. I have no idea what they are and thought I'd post a photo here in hopes someone could identity them.

Anyone post a photo for me?
Last edited by gus on Sun Nov 10, 2019 11:28 am, edited 1 time in total.

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: Need photo posted

Post by Jim B » Sun Nov 10, 2019 6:01 am

gus,

Check you PMs.

Jim


gus
2010 crawler
2010 crawler
Posts: 695
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

Re: Need photo posted

Post by gus » Sun Nov 10, 2019 8:22 am

Thanks for the help!!


gus
2010 crawler
2010 crawler
Posts: 695
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

Re: photo posted now

Post by gus » Sun Nov 10, 2019 4:34 pm

Did some cleaning on the bottom one, with round ends. Those round parts are welded on, very poor sloppy looking welds. They look like they were welded onto one with the star shape. 6 5/8" diameter on the top 2 and 7 3/4" on the round ended one. They are castings, 1 1/8" bore, look like held on with a shear pin or hard pin.

Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests