Still around and working too many hours.
Hope all of you are well.
Dan.
Dropped by to say"Hi"
Dropped by to say"Hi"
1956 420C with GSC blade
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
Re: Dropped by to say"Hi"
Glad you're doing well. How's that shop restoration project coming, you get it all done or will it ever be done?
JD- 450C track loader
Serial #208336T
Serial #208336T
Re: Dropped by to say"Hi"
The shop project is an ongoing operation. The south side of the roof is about 60% done. I demo most all the original roof framing on that side and have rebuilt it. Just waiting for a couple good weather days to finish the framing. Then install the steel roofing panels.
Then I can get the inside gutted and remodeled. The section of the shop under this roof is 12' × 20' with a 4' addition on the end. This area of the shop will become the machine area. Will move all my machine tools into it once the remodel is done.
Dan.
Then I can get the inside gutted and remodeled. The section of the shop under this roof is 12' × 20' with a 4' addition on the end. This area of the shop will become the machine area. Will move all my machine tools into it once the remodel is done.
Dan.
1956 420C with GSC blade
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!
Who is online
Users browsing this forum: No registered users and 57 guests