firewood

bulldozerman · Post by **bulldozerman** » Sat Jan 23, 2010 2:34 pm

this has nothing to do with this forum at all, but anyway, does anybody know approx. how much block wood would make a full cord?
Thanks
Branden

RANDY Fay · Post by **RANDY Fay** » Sat Jan 23, 2010 6:18 pm

it would be a pile 4 foot X 4 foot X 8 feet long

cdunn · Post by **cdunn** » Sat Jan 23, 2010 6:59 pm

A cord of wood is 128 cubic feet in volume. A stack of wood 4ft. high 4ft wide and 8ft. long would equal a cord. Most firewood is cut 24 inches or so in length so, two stacks of 24 inch wood 4ft high and 8ft. long would equal one cord. The stack should relatively tight and with only normally expected voids.

bulldozerman · Post by **bulldozerman** » Sat Jan 23, 2010 10:24 pm

im sorry but i kinda worded that wrong, what i mean was how big of a pile of block wood would i need to equal a cord of split wood.

1950JDMC · Post by **1950JDMC** » Fri Feb 26, 2010 8:38 pm

It would approx. be the same. Actually it depends on the diameter of the rounds.

1958 Simplicity 101 Landlord
1950 John Deere MC crawler
1991 Case 580K-E Backhoe

JDcrawlers Messageboard

firewood

firewood

Who is online