impact wrenches 1/2 or 3/4
- tuney443
- 440 crawler
- Posts: 155
- Joined: Fri Apr 25, 2008 10:28 pm
- Location: Poughkeepsie,NY
- Contact:
No inverter,generator,or that other thingy--electricity needed if you just use a Swench--a manual impact wrench made by Curtis-Wright.I have the 750 model--3/4'' drive rated at 800 lbs.torque,the big kahuna,the 1.5'' drive is good for 7,000 lbs.--Best place to buy is EBAY.
Found the skull to the mastodon in Hyde Park, youngest one ever found so far in the world in 2000.
JD35D midi exc.
JD410G TLB
JD450D Dozer
2 JD 440 track loaders
JD 420 track loader
JD 450C track loader
JD35D midi exc.
JD410G TLB
JD450D Dozer
2 JD 440 track loaders
JD 420 track loader
JD 450C track loader
I have one of those too, you can't afford to buy them new, last I heard, the 3/4" is way over $1000.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- tuney443
- 440 crawler
- Posts: 155
- Joined: Fri Apr 25, 2008 10:28 pm
- Location: Poughkeepsie,NY
- Contact:
That's correct,actually the entire 7500 kit in a metal toolbox goes for app. $3,400 with 13 sockets,extensions,and offset adapters.I just lost a bid on a gov't auction for 2 of these bran new plus a nice new OTC bearing puller set.All 3 units went for around $700,a bargain I suppose,I just didn't have to have it.I see the high bidder has the 2 Swench's on Ebay now for $1,300 each.Like I said before though,there are usually a few used ones there,sometimes as low as $250 and used works just as good as new with these extremely well built tools.
Found the skull to the mastodon in Hyde Park, youngest one ever found so far in the world in 2000.
JD35D midi exc.
JD410G TLB
JD450D Dozer
2 JD 440 track loaders
JD 420 track loader
JD 450C track loader
JD35D midi exc.
JD410G TLB
JD450D Dozer
2 JD 440 track loaders
JD 420 track loader
JD 450C track loader
Who is online
Users browsing this forum: No registered users and 50 guests