What is the best way to move two trackless crawlers around my shop?
I moved one inside by lifting the rear with the loader and rolling it along the front idlers on the concrete. I plan on sliding the other in next to it this weekend.
What are the chances I wil break the flange off the front idler? I also need to roll them backwards under my hoist. Will the roller flanges handle this? I wouldnt be twisting on the rollers. I'd make sure I have them lined with the loader before I roll them back.
Moving a trackless crawler
-
- 40C crawler
- Posts: 16
- Joined: Thu Mar 01, 2012 6:55 am
- Location: Prince Edward Island, Canada
Moving a trackless crawler
1957 420C 5 spd with reverser
i was thinking the same thing they get rocks in between the rollers and tracks and crush them.... as long as your not trying to spin donuts on the rollers you should be fine
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: No registered users and 86 guests