massey ferguson industrial tractors

Discuss non-crawler related issues here (keep it sane, please)
Post Reply
gene s
420 crawler
420 crawler
Posts: 40
Joined: Wed Aug 13, 2008 9:02 am
Location: north central ill.

massey ferguson industrial tractors

Post by gene s » Tue Jun 04, 2013 10:45 am

This is probably a long shot, but does anyone know of a site similar to this one that deals with massey ferguson industrial tractors.
MF40, MF30,350B

whiteclipse16
2010 crawler
2010 crawler
Posts: 622
Joined: Tue Mar 30, 2010 8:02 am
Location: Steubenville, OH

Post by whiteclipse16 » Tue Jun 04, 2013 7:12 pm

Good question Gene.
We have a Massey 135 diesel that needs some work, so hopefully somebody knows of something.
Ben

Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Tue Jun 04, 2013 8:32 pm

Yesterday's Tractors dot com has forums for most brands of tractors and a separate forum for crawlers, loaders and etc. This is my only suggestion where you could look.
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

JWB Contracting
2010 crawler
2010 crawler
Posts: 597
Joined: Thu Aug 27, 2009 10:08 pm
Location: Edmonton, Alberta

MF Men

Post by JWB Contracting » Tue Jun 04, 2013 9:07 pm

I didn't really want to admit it, but I have a perkins powered MF 135. It was purchased new by my grandparents. Runs and works well, could use a grill and muffler.

The 3 point hitch stopped working, going to start with a hydraulic filter change. Also have a factory loader and valve which I have removed along with some MF implements. It's in a shed and I start it a few times a year.
Jason Benesch

John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors

User avatar
digitup2
350 crawler
350 crawler
Posts: 858
Joined: Tue Feb 05, 2008 6:36 pm

Post by digitup2 » Wed Jun 05, 2013 7:12 am

I know that Yesterdays tractor form and the Ferguson form aren't always up to snuff I have a Ferguson TO30 I with the service door in the hood so it is a pre 35 build and pre x build of 55-57 era and even with the serial # you should get some info well I get told industrial only came out when Massey acquired the manufacturing rights but this tractor is yellow and not a speck of grey even the Ferguson emblem on the front and both side emblems are yellow inset with matching yellow paint I know in those days Ferguson used several color combinations with grey,green, gold or red on them I just want to paint it original industrial yellow again s/n says it is a 1955 so it was built before the Massey take over and this time frame the Ferguson tractors were getting away from the straight gun boat grey that was common for so many years So have I got an odd ball I don't know but at this point I am not touching the original paint job that is for sure.Digitup.

gene s
420 crawler
420 crawler
Posts: 40
Joined: Wed Aug 13, 2008 9:02 am
Location: north central ill.

Post by gene s » Wed Jun 05, 2013 8:43 am

Yea, those other forums don't even come close to this one. Years back there was Big Deans website, a retired MF industrial mechanic, but he has passed and the site is now gone. I have 3 MF industrials, all bought new between 1974 & 1977, hard to kill em if you maintain them, same as anything else.
MF40, MF30,350B

User avatar
Tigerhaze
350 crawler
350 crawler
Posts: 2278
Joined: Thu Jul 06, 2006 12:13 pm
Location: West-Central MO

Post by Tigerhaze » Wed Jun 05, 2013 9:01 am

YT is probably the most well-known tractor board and there are a number of knowledgable folks on there. I do like their blogs on 8N repair and restoration. However I find navigation of the discussion forums on that site to be frustrating so I don't use it as much as I used to.

There are a number of other sites that have brand-specific forums that you could give a shot. One of which is mytractorforum.com . I am not recommending it but they seem to have an active board with a lot of categories for brands including MF. If you go to that site make sure you go in the "Big Boys" forum as that is where full-size tractors are discussed. SSBtractor.com also has a MF discussion forum, but has the same frustrating navigation as the YT site.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment

User avatar
Willyr
2010 crawler
2010 crawler
Posts: 695
Joined: Sat Jul 17, 2010 3:03 am
Location: Downeast Maine (North of Ellsworth)

Post by Willyr » Wed Jun 05, 2013 7:06 pm

You might try
http://www.antiquetractorsforum.com
They deal with anything tractor.
Mind your p's and q's. They dont care for some of my christian humor I have found.
former owner of a 1956 420c
All help is greatly appreciated.

Proud owner of a project 1952 JD 60

http://www.youtube.com/watch?v=nFehqXVd9z4

whiteclipse16
2010 crawler
2010 crawler
Posts: 622
Joined: Tue Mar 30, 2010 8:02 am
Location: Steubenville, OH

Post by whiteclipse16 » Thu Jun 06, 2013 7:14 am

Thanks guys,
I'll check those out.
Ben

Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring

Post Reply

Who is online

Users browsing this forum: No registered users and 90 guests