Anyone come up with a better way to get snow off the roof?

Discuss non-crawler related issues here (keep it sane, please)
Scottyb
2010 crawler
2010 crawler
Posts: 565
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Anyone come up with a better way to get snow off the roof?

Post by Scottyb » Tue Mar 11, 2014 10:32 pm

I have been standing in the bucket of my 350b loader to reach the top of this roof. It works but...I need a better way, I have lots of roof !

Image
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Tue Mar 11, 2014 11:06 pm

How did you get all that sugar up there, anyway??
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Wed Mar 12, 2014 7:34 am

I've used one of these as well as roof rakes like you. The electric blower works reasonably well unless the snow's particularly heavy. I use a 100' power cord, wallow to the ridge and work down towards the eaves so I don't fall off the roof. I usually do the last bit with a rake from the ground.

Snow's nice, but what a pain when you need to move it.

This other product looks interesting too, but I've never used it.
http://www.roofrake.com/Productpages/roofrakerazor.asp


Image
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

Scottyb
2010 crawler
2010 crawler
Posts: 565
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Post by Scottyb » Wed Mar 12, 2014 8:20 am

Paul, I really like the look of that roof rake razor. I have about 4000 ft2 of roof between the 3 family cabins and garage and it looks like a winner.
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments

Scottyb
2010 crawler
2010 crawler
Posts: 565
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Post by Scottyb » Wed Mar 12, 2014 8:20 am

Paul, I really like the look of that roof rake razor. I have about 4000 ft2 of roof between the 3 family cabins and garage and it looks like a winner.
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments

User avatar
Lu47Dan
1010 crawler
1010 crawler
Posts: 401
Joined: Mon Feb 11, 2008 3:17 pm
Location: NWPa

Post by Lu47Dan » Wed Mar 12, 2014 2:31 pm

Go to steel roofing and than slam a door hard :D :twisted:
Dan.
1956 420C with GSC blade
Tools are to men as shoes are to women , you can never have too many !!
Used diesel engines are an adventure any way you look at them !!

User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Wed Mar 12, 2014 2:42 pm

Scotty
It looked good to me too. I have a few 6/12, 9/12 and 12/12 pitch roofs and any thing that would let gravity do more of the work is a plus. the 12/12 roofs are pretty easy, the shallower ones mean more work.

The razor looked like it allow you to work "under" the snow so you don't have to put in as much energy lifting the rake's head. What I also thought was nice is that the aluminum extension poles I already own seem to fit
Good luck. We're getting a predicted 18"-24" today into tomorrow night; we already have about 9" new. I'll be raking some of mine too.
Usually around here at this time of year, I'm more concerned with sap flow than roof raking - but the skiing's still great! So it comes down to choices.

:D

Paul
Last edited by Paul Buhler on Wed Mar 12, 2014 2:54 pm, edited 1 time in total.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

gus
2010 crawler
2010 crawler
Posts: 696
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

Post by gus » Wed Mar 12, 2014 2:53 pm

If it isn't to heavy, a leaf blower works great. The bigger the better.

User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Wed Mar 12, 2014 2:58 pm

Gus: You're bragging. Powder that dry rarely exists here. I've seen some of the videos using a blower to move snow. I wish we had more of that kind of powder - if we did , I wouldn't need to rake anyway - the roofs can handle those kinds of load.
Paul
Last edited by Paul Buhler on Thu Mar 13, 2014 6:41 am, edited 1 time in total.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

Scottyb
2010 crawler
2010 crawler
Posts: 565
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Post by Scottyb » Thu Mar 13, 2014 12:28 am

The snow here is all dry. Until this week we never had one single day above freezing since early November (and a near record 30 days colder than -30) now the risk here is that all that snow on the roof gets wet and in March - April we will sometimes get that wet stuff on top. If it is not cleared soon we could have 6 feet of heavy stuff up there. Every spring we have someone we know loose a roof during a late storm. One plus having long cold spells, you do not have to wash vehicles for months at a time!
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments

gus
2010 crawler
2010 crawler
Posts: 696
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

Post by gus » Thu Mar 13, 2014 10:14 am

Just tell the wife to get you a beer first then get up on the roof and shovel it off... Holler when she's done and you'll put the ladder back up for her. :shock: :shock: :lol: :lol:

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Thu Mar 13, 2014 9:23 pm

Richard here in southern California What is this "SNOW" of which you speak? 8) 8)
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

oldtanker
440 crawler
440 crawler
Posts: 123
Joined: Tue Mar 24, 2009 4:12 pm
Location: west Minnesota

Post by oldtanker » Thu Mar 13, 2014 10:37 pm

jtrichard wrote:Richard here in southern California What is this "SNOW" of which you speak? 8) 8)
Frozen rain. What are these mud slides and earth quakes you folks talk about?

Rick

User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Fri Mar 14, 2014 9:31 am

If it is not cleared soon we could have 6 feet of heavy stuff up there.
That's a lot of snow! In some years I'll see about 3' piled on the roofs, but thaws usually reduce this depth.

After this week's storm I'm looking at about 2' on the roofs and I'll be raking the eaves before tomorrows forecast rain showers - for those in warmer places, this minimizes ice dams and lets the water drip off the roof rather than back up under the shingles - and down the inside walls.

Best wishes for a Spring that's not too wet and muddy.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Sat Mar 15, 2014 12:16 am

With just hundredths over a half inch of moisture since the first of the year and only about an inch since October we would take any precipitation anybody wants to send us. In any form. LOL
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests