recently acquired a 1956 420C with a Greenville steel car company loader on it. I was told it ran and drove when parked a few years ago. Get it home and the engine is stuck. Got it freed up and running and go to take it off the trailer and find out it has no reverse. So after pulling the top cover i find out the gear on the main input shaft that goes to the PTO and for reverse has the teeth broken off. My guess from hitting something with his brush hog. Since then I have dissembled the entire trans and ordered all new bearings and seals and found a used shaft and cluster gear with the help of Lavoy. Figured I would share some pics of the machine and see if anyone had any comments on it or issues that I have missed so far in looking it over.
[/url]
1956 420C Project
1956 420C Project
John Deere 420C with Loader. Ferguson TO-35 with Davis Loader. John Deere 318 and many more....
- mapaduke@yahoo.com
- 1010 crawler
- Posts: 420
- Joined: Sun Sep 13, 2009 6:27 pm
- Location: Rochester N.H.
-
- MC crawler
- Posts: 5
- Joined: Sun Mar 20, 2016 12:05 am
Who is online
Users browsing this forum: No registered users and 52 guests