Been taken away from this for a bit but have finally gotten back to working on it a bit. Got the cooling system hooked up and was able to get it running somewhat properly the other day. Quite loud in a small shop with no muffler. What a relief everything with the trans and steering seemingly functions properly. I see there must be a small leak at the water pump but not too bad. Had the roller carriages media blasted and got a coat of paint on them. Still working on the wiring......
Does anyone know if there is a port to put an oil pressure switch on the 420 engine for an hour meter, I was able to get my hour meter working again and would like to hook it up. I checked and seen the 420 hour meter functioned differently than the 40. I assume I could use the port at the oil filter somehow but was hoping for something better than t'ing that. There looks to be a port next to the dipstick that has a plug in it?
40c Project
Re: 40c Project
https://youtube.com/shorts/6tHKh3KfVys?feature=share
First time she's seen daylight in a couple years. Out for a test drive everything working.
Not running quite right yet though, seems like it's missing once and awhile or something ..... going to try some new points maybe...
First time she's seen daylight in a couple years. Out for a test drive everything working.
Not running quite right yet though, seems like it's missing once and awhile or something ..... going to try some new points maybe...
Who is online
Users browsing this forum: No registered users and 39 guests