With the weather getting warmer, I can now get back to work out in the garage and I built this stand to display the model next to my crawler at the tractor shows this year.
The bottom of the base for the model has a pin fastened to it.
This pin fits down thru a hole when it is set on the stand.
A small padlock is attached to this pin to secure the model to the stand.
I have a section of cable and a padlock to secure the stand to something at the shows so no one can just walk off with the whole thing.
The pin can be folded flat, up into the cavity in the base of the model.
This allows the model to be set on a shelf for displaying it at home.
![Image](https://images2.imgbox.com/a3/dd/tveKVYGp_o.jpg)