PICS OF MY 440IC , HAVE EVERYTHING TORE DOWN TO THE REVERSER AND FIXING BROKEN RING AND PINION ON DIFFERENTIAL, ALSO REBUILT REAR DRIVE SPROCKET
IRONYETTY'S 440 IC TOY
- JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
I see you got Photobucket to work for you. Keep the pictures coming with your progress.
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
- hunter41mag
- 440 crawler
- Posts: 126
- Joined: Tue Apr 12, 2005 7:11 am
- Location: Eastern Pennsylvania (NE of Allentown)
The winch is a gearmatic but I'm not sure what model I never looked for numbers on it. I think it is froze up so I haven't messed with it but once everything else is put back together I'm going to rebuild it as well. The property I will be using it on, I will probably need it to get me out of a few jams!
Ironyetty
Ironyetty
I would have to find my book to be sure, but about 9,250lbs pull, first wrap, full throttle. That is about what the book says, in my experience, it will drag a 5 roller 420 with a 62 blade across the yard with the engine idling and about 6 wraps of cable on it with the blade down, and the tracks locked. I don't think Gearmatic's rating system is quite the same as these new electric winches, because my 10,000lb electric will barely pull a rolling 420 up the ramps some times.
Lavoy
Lavoy
Who is online
Users browsing this forum: No registered users and 73 guests