Well, we got the tracks turned around, one new tension spring, one new front idler wheel, freed up the left side clutch, e-bay engine installed, all fluids changed, carb rebuilt, generator rebuilt, new radiator, and new seat & seat back. The last thing we are waiting on is the valves and seats to be ground and we should be ready to take it for a spin!
Almost ready for the maiden voyage!
- FarmLife
- 430 crawler
- Posts: 98
- Joined: Tue Aug 28, 2007 8:55 pm
- Location: Saint Clair, Michigan
- Contact:
Almost ready for the maiden voyage!
1934 GP Beaner
1935 B
1935 AR
1935 AO
1936 B
1936 D
1935 A on skeletons
1937 A w/behlen overdrive
1939 B
1940 B
1941 H
1949 M
1954 40 Standard
1953 60 Regular
1955 70 Std Diesel
1954 80
1946 Lindeman
Phase 1 420
1935 B
1935 AR
1935 AO
1936 B
1936 D
1935 A on skeletons
1937 A w/behlen overdrive
1939 B
1940 B
1941 H
1949 M
1954 40 Standard
1953 60 Regular
1955 70 Std Diesel
1954 80
1946 Lindeman
Phase 1 420
- FarmLife
- 430 crawler
- Posts: 98
- Joined: Tue Aug 28, 2007 8:55 pm
- Location: Saint Clair, Michigan
- Contact:
Well the loader is a big scary looking thing, and we just would not use it at all. Plus we like it more as the agricultural crawler than one with a loader, our main plan for now is to use the crawler to drag logs out of the cattle pasture. Plus we have a much bigger tractor with a loader to use when we need to lift anything.
Plus we need the money to get our D running and get some more parts to complete the crawler.
Plus we need the money to get our D running and get some more parts to complete the crawler.
1934 GP Beaner
1935 B
1935 AR
1935 AO
1936 B
1936 D
1935 A on skeletons
1937 A w/behlen overdrive
1939 B
1940 B
1941 H
1949 M
1954 40 Standard
1953 60 Regular
1955 70 Std Diesel
1954 80
1946 Lindeman
Phase 1 420
1935 B
1935 AR
1935 AO
1936 B
1936 D
1935 A on skeletons
1937 A w/behlen overdrive
1939 B
1940 B
1941 H
1949 M
1954 40 Standard
1953 60 Regular
1955 70 Std Diesel
1954 80
1946 Lindeman
Phase 1 420
I was looking at your other post of the manual for this and at your eBay auction. It is quite an arrangement of tubing.FarmLife wrote:Well the loader is a big scary looking thing, and we just would not use it at all.
I wouldn't think a whole lot of those were sold for the MC.
A MC with this on it would draw a lot of interest at tractor shows.
Hope someone buys it from you that can use it or put it on a crawler they just show, so it doesn't end up in the scrap yard. .. Ray
Who is online
Users browsing this forum: No registered users and 39 guests