Show us pictures of your JD crawler and attachments.
-
ritchiegilby
- 40C crawler
- Posts: 20
- Joined: Mon May 05, 2008 5:25 pm
- Location: Enfield NS CANADA
-
Contact:
Post
by ritchiegilby » Tue Nov 11, 2008 3:32 pm
hey guys
got a 65 1010 gas it pops out of reverse unless i hold my hand against the gear shift, otherwise works great. any ideas, it is a manual tranny
ritchie
-
Lavoy
- Site Admin
- Posts: 10949
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Nov 12, 2008 8:35 am
Sounds like a bad bearing or two. Pull the top cover and look at the gears, wiggle on the shafts with a pry bar, that may show you what is bad.
Lavoy
-
ritchiegilby
- 40C crawler
- Posts: 20
- Joined: Mon May 05, 2008 5:25 pm
- Location: Enfield NS CANADA
-
Contact:
Post
by ritchiegilby » Wed Nov 12, 2008 8:49 am
is that an "easy fix" or is that a break in half job if i find the problem through the top case
-
Lavoy
- Site Admin
- Posts: 10949
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Nov 12, 2008 4:11 pm
If it is a bearing, then it is a break it in half, pull both finals, gut it to an empty case fix.
Lavoy
Who is online
Users browsing this forum: No registered users and 83 guests