Show us pictures of your JD crawler and attachments.
-
cpjd450b
- 40C crawler
- Posts: 13
- Joined: Sat Apr 09, 2005 6:40 am
- Location: Cochrane Ont. Canada
Post
by cpjd450b » Thu Oct 20, 2005 5:02 pm
I bought this a month ago, rebuilt the steering clutches and now it runs great! It has a gas engine and a homemade hydraulic draw bar for skidding logs. I hope it works better this winter than my bombardier J5 did last winter!
-
cpjd450b
- 40C crawler
- Posts: 13
- Joined: Sat Apr 09, 2005 6:40 am
- Location: Cochrane Ont. Canada
Post
by cpjd450b » Thu Oct 20, 2005 5:12 pm
sorry i can't figure out how to post it!
Thanks
Chad
-
Lavoy
- Site Admin
- Posts: 10952
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Thu Oct 20, 2005 7:26 pm
I figured out how to do it, so it is doable. Go to the message board Q & A and read Jeremy's directions. I had to do it a couple of times, but then I figured out what I was doing wrong.
lavoy
-
JD40c
- Site Admin
- Posts: 221
- Joined: Sun Apr 03, 2005 9:14 pm
- Location: Athena, OR
-
Contact:
Post
by JD40c » Thu Oct 20, 2005 9:57 pm
cpjd450b, you had BBCode disabled in your profile. I re-enabled it. If you truly want it turned off, you can click the Profile button at the top of the page here and turn it back off. If you do, none of the BBCode scripting will run and you won't see anything but the code someone has posted in their message (i.e. no pictures).
-
cpjd450b
- 40C crawler
- Posts: 13
- Joined: Sat Apr 09, 2005 6:40 am
- Location: Cochrane Ont. Canada
Post
by cpjd450b » Sat Oct 22, 2005 11:05 am
Thanks alot!!!
Who is online
Users browsing this forum: No registered users and 56 guests