JOHN DEERE CRAWLER BLADES

Show us pictures of your JD crawler and attachments.
Post Reply
User avatar
ONTARIOJD40C
40C crawler
40C crawler
Posts: 24
Joined: Wed Dec 16, 2009 6:39 am
Location: Milton Ontario Canada
Contact:
Contact ONTARIOJD40C

JOHN DEERE CRAWLER BLADES

Post by ONTARIOJD40C » Thu Dec 17, 2009 8:57 am

what is the correct blade for each model of john deere crawler from the bo on up to the new generation crawlers i know the 420 had the model 62 and i belive that is the correct blade for that model but i am not shure on that aswell anybody know ?.John
NOTHING RUNS LIKE A DEERE
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Thu Dec 17, 2009 9:01 am

By correct, I am assuming you mean factory?
BO Lindeman is Lindeman tool carrier only.
MC is MC1000 tool carrier, MC60
40C is #1000 & #1100 tool carrier, MC60, 61, and 62 will fit
420 and 430 are 61, 62, and 602
440 is 63, 64, and 602
There is an unknown number of aftermarket blades designed for these crawlers that are correct, but not factory.
Lavoy
Last edited by Lavoy on Mon Apr 12, 2010 2:31 pm, edited 2 times in total.
Top
User avatar
ONTARIOJD40C
40C crawler
40C crawler
Posts: 24
Joined: Wed Dec 16, 2009 6:39 am
Location: Milton Ontario Canada
Contact:
Contact ONTARIOJD40C

Post by ONTARIOJD40C » Thu Dec 17, 2009 10:02 am

yes factory blades.John
NOTHING RUNS LIKE A DEERE
Top
User avatar
ONTARIOJD40C
40C crawler
40C crawler
Posts: 24
Joined: Wed Dec 16, 2009 6:39 am
Location: Milton Ontario Canada
Contact:
Contact ONTARIOJD40C

Post by ONTARIOJD40C » Mon Apr 12, 2010 12:44 pm

has anybody seen this type of blade before any info on it.John

http://www.youtube.com/watch?v=AydtvV6XL34
NOTHING RUNS LIKE A DEERE
Top
User avatar
ONTARIOJD40C
40C crawler
40C crawler
Posts: 24
Joined: Wed Dec 16, 2009 6:39 am
Location: Milton Ontario Canada
Contact:
Contact ONTARIOJD40C

Post by ONTARIOJD40C » Mon Apr 12, 2010 12:47 pm

blade looks to be factory looks like the tool carrier but on the front of the crawler with a blade attacment.John
NOTHING RUNS LIKE A DEERE
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Mon Apr 12, 2010 2:33 pm

That is an MC1000 tool carrier with DZ100 dozer blade adapter and end plates on the moldboard.
Lavoy
Top
User avatar
ONTARIOJD40C
40C crawler
40C crawler
Posts: 24
Joined: Wed Dec 16, 2009 6:39 am
Location: Milton Ontario Canada
Contact:
Contact ONTARIOJD40C

Post by ONTARIOJD40C » Mon Apr 12, 2010 3:22 pm

is the dz jd factory or a home made unit have you seen many tool carriers used like this i thought the tool carriers were used on the rear of the crawlers only.John
NOTHING RUNS LIKE A DEERE
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Mon Apr 12, 2010 5:12 pm

I may have it backwards, DZ100 I think is the rear dozer mount adapter, MC100 is the front mount blade, both are factory.
I have only ever seen a small percentage of the tool carriers on the rear, almost all of the ones I have seen have been on front with the dozer blade attachment. Tool carriers were designed to be used on either end of the crawler with a multitude of attachments, both front and rear.
Lavoy
Top
Post Reply

Return to “Show & Tell”

Who is online

Users browsing this forum: No registered users and 32 guests