JOHN DEERE CRAWLER BLADES
- ONTARIOJD40C
- 40C crawler
- Posts: 24
- Joined: Wed Dec 16, 2009 6:39 am
- Location: Milton Ontario Canada
- Contact:
JOHN DEERE CRAWLER BLADES
what is the correct blade for each model of john deere crawler from the bo on up to the new generation crawlers i know the 420 had the model 62 and i belive that is the correct blade for that model but i am not shure on that aswell anybody know ?.John
NOTHING RUNS LIKE A DEERE
By correct, I am assuming you mean factory?
BO Lindeman is Lindeman tool carrier only.
MC is MC1000 tool carrier, MC60
40C is #1000 & #1100 tool carrier, MC60, 61, and 62 will fit
420 and 430 are 61, 62, and 602
440 is 63, 64, and 602
There is an unknown number of aftermarket blades designed for these crawlers that are correct, but not factory.
Lavoy
BO Lindeman is Lindeman tool carrier only.
MC is MC1000 tool carrier, MC60
40C is #1000 & #1100 tool carrier, MC60, 61, and 62 will fit
420 and 430 are 61, 62, and 602
440 is 63, 64, and 602
There is an unknown number of aftermarket blades designed for these crawlers that are correct, but not factory.
Lavoy
Last edited by Lavoy on Mon Apr 12, 2010 2:31 pm, edited 2 times in total.
- ONTARIOJD40C
- 40C crawler
- Posts: 24
- Joined: Wed Dec 16, 2009 6:39 am
- Location: Milton Ontario Canada
- Contact:
- ONTARIOJD40C
- 40C crawler
- Posts: 24
- Joined: Wed Dec 16, 2009 6:39 am
- Location: Milton Ontario Canada
- Contact:
has anybody seen this type of blade before any info on it.John
http://www.youtube.com/watch?v=AydtvV6XL34
http://www.youtube.com/watch?v=AydtvV6XL34
NOTHING RUNS LIKE A DEERE
- ONTARIOJD40C
- 40C crawler
- Posts: 24
- Joined: Wed Dec 16, 2009 6:39 am
- Location: Milton Ontario Canada
- Contact:
- ONTARIOJD40C
- 40C crawler
- Posts: 24
- Joined: Wed Dec 16, 2009 6:39 am
- Location: Milton Ontario Canada
- Contact:
I may have it backwards, DZ100 I think is the rear dozer mount adapter, MC100 is the front mount blade, both are factory.
I have only ever seen a small percentage of the tool carriers on the rear, almost all of the ones I have seen have been on front with the dozer blade attachment. Tool carriers were designed to be used on either end of the crawler with a multitude of attachments, both front and rear.
Lavoy
I have only ever seen a small percentage of the tool carriers on the rear, almost all of the ones I have seen have been on front with the dozer blade attachment. Tool carriers were designed to be used on either end of the crawler with a multitude of attachments, both front and rear.
Lavoy
Who is online
Users browsing this forum: No registered users and 31 guests