the 450 i am picking up saturday
no problem
not a problem, I will take a pic for you, it is mounted/bolted to the right floor board, in a "can", about to send it out to get repaired.
Stenes's speedo shop in altoona Wi
also looking for a replacement dust bowl R28794
it is coming together
Stenes's speedo shop in altoona Wi
also looking for a replacement dust bowl R28794
it is coming together
Re: no problem
Just about any Deere ag dealer should have one of those sitting on the shelf for about $15. They were used on all kinds of ag tractors in addition to the crawlers for decades.markmc60 wrote: also looking for a replacement dust bowl R28794
winch plug/cap
allright, new question, the cap/plug oil fill for the winch appears to be from a barrel. just a stamped metal barrel plug is that right?, appears the tranny plug is the same type barrel plug, seems ...... cheap!?
Not cheap, economical. Nothing is cheap when you are dealing with a crawler. Just price it at Ma Deere.
Bryce
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
-
- 430 crawler
- Posts: 62
- Joined: Sat Nov 10, 2012 6:14 pm
- Location: Western MA
hood latches
looking for hood latch hardware,
Who is online
Users browsing this forum: No registered users and 55 guests