the 450 i am picking up saturday

markmc60 · Post by **markmc60** » Thu Nov 01, 2012 8:26 am

not a problem, I will take a pic for you, it is mounted/bolted to the right floor board, in a "can", about to send it out to get repaired.
Stenes's speedo shop in altoona Wi

also looking for a replacement dust bowl R28794

it is coming together

tjdub · Post by **tjdub** » Thu Nov 01, 2012 1:54 pm

markmc60 wrote: also looking for a replacement dust bowl R28794

Just about any Deere ag dealer should have one of those sitting on the shelf for about $15. They were used on all kinds of ag tractors in addition to the crawlers for decades.

markmc60 · Post by **markmc60** » Mon Nov 05, 2012 11:28 am

allright, new question, the cap/plug oil fill for the winch appears to be from a barrel. just a stamped metal barrel plug is that right?, appears the tranny plug is the same type barrel plug, seems ...... cheap!?

shinnery · Post by **shinnery** » Mon Nov 05, 2012 7:26 pm

Not cheap, economical. Nothing is cheap when you are dealing with a crawler.

Just price it at Ma Deere.

Bryce

05victorylly · Post by **05victorylly** » Sun Dec 09, 2012 8:16 pm

Looks like it may be time for sprockets and pins and bushing some time soon, but to me it looks like you have about an inch of adjustment left in that idler.

markmc60 · Post by **markmc60** » Sun Feb 10, 2013 6:07 pm

looking for hood latch hardware,

jtrichard · Post by **jtrichard** » Sun Feb 10, 2013 6:41 pm

looks like its only the latch 4 used and its number is T21333 shows no other hardware for hood on dozer ...loader takes more parts

markmc60 · Post by **markmc60** » Sat Mar 23, 2013 9:39 am

JDcrawlers Messageboard

the 450 i am picking up saturday

no problem

Re: no problem

winch plug/cap

hood latches

tach picture

Who is online