John Deere 350 straight with 6 way blade and Gafner log load
- lurch85
- 430 crawler
- Posts: 95
- Joined: Fri Feb 01, 2013 6:11 pm
- Location: Upper Peninsula of Michigan
John Deere 350 straight with 6 way blade and Gafner log load
John Deere 420C, John Deere 350 straight with Gafner loader, John Deere 4020
- lurch85
- 430 crawler
- Posts: 95
- Joined: Fri Feb 01, 2013 6:11 pm
- Location: Upper Peninsula of Michigan
yes, the link isnt working.. i need to spend more time and figure out how to get it to work,.... even delete this post and the previous one. If anyone with the power wants to delete it for me, go ahead. (no more time to spend now)
John Deere 420C, John Deere 350 straight with Gafner loader, John Deere 4020
I thought I had it where it would work but it didn't.
Bryce
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Try copying the whole link below
https://skydrive.live.com/redir?resid=E ... ms04MDsY8A
(minus "/url") into the browser window and then launch. Hope I've explained this accurately.
I did get to see a crawler with a pulp loader attached.
https://skydrive.live.com/redir?resid=E ... ms04MDsY8A
(minus "/url") into the browser window and then launch. Hope I've explained this accurately.
I did get to see a crawler with a pulp loader attached.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
- Willyr
- 2010 crawler
- Posts: 695
- Joined: Sat Jul 17, 2010 3:03 am
- Location: Downeast Maine (North of Ellsworth)
the problem is the link contains exclamation points. ( ! )
Lavoy's board software tries to end the url after an exclamation point.
Lavoy's board software tries to end the url after an exclamation point.
former owner of a 1956 420c
All help is greatly appreciated.
Proud owner of a project 1952 JD 60
http://www.youtube.com/watch?v=nFehqXVd9z4
All help is greatly appreciated.
Proud owner of a project 1952 JD 60
http://www.youtube.com/watch?v=nFehqXVd9z4
- lurch85
- 430 crawler
- Posts: 95
- Joined: Fri Feb 01, 2013 6:11 pm
- Location: Upper Peninsula of Michigan
Thanks Willy!
Thanks Willy!
John Deere 420C, John Deere 350 straight with Gafner loader, John Deere 4020
Who is online
Users browsing this forum: No registered users and 42 guests