Brought home this neglected 420 on Friday.
photo hosting sites
If any one knows the mfg. of the loader, it would be helpful.
Thanks - Jim
420C
it is a henery loader, heres the thread to my abused pos.
http://www.jdcrawlers.com/messageboard/ ... sc&start=0
http://www.jdcrawlers.com/messageboard/ ... sc&start=0
I would put a set or rock guards back on it. 5 roller trackframes are prone to bending without rock guards in place, multiplied greatly on a loader crawler.
Lavou
Lavou
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
The rockquards are missing on the right, I'll have to find replacements. Left side track frame has been repaired (welded) at least once. That's quite a bit of weight (2000#'s empty) on those points.
I am going pull off the loader - to do other repars/maintenance. Don't know if I'll be putting it back on.
I am going pull off the loader - to do other repars/maintenance. Don't know if I'll be putting it back on.
Who is online
Users browsing this forum: No registered users and 66 guests