420C

Show us pictures of your JD crawler and attachments.
Post Reply
User avatar
Cletrac68
40C crawler
40C crawler
Posts: 19
Joined: Sat Nov 09, 2013 9:49 pm
Location: Western PA.

420C

Post by Cletrac68 » Sat Nov 16, 2013 8:11 pm

Brought home this neglected 420 on Friday.

Image
photo hosting sites

If any one knows the mfg. of the loader, it would be helpful.

Thanks - Jim

User avatar
NNAATZ
1010 crawler
1010 crawler
Posts: 296
Joined: Fri Oct 13, 2006 7:16 am
Location: austin,mn

Post by NNAATZ » Mon Nov 18, 2013 4:58 pm

it is a henery loader, heres the thread to my abused pos.
http://www.jdcrawlers.com/messageboard/ ... sc&start=0

User avatar
Cletrac68
40C crawler
40C crawler
Posts: 19
Joined: Sat Nov 09, 2013 9:49 pm
Location: Western PA.

Post by Cletrac68 » Tue Nov 19, 2013 11:46 am

Thanks - Tag on the back says TS-40F.

Brochure pic from ebay -

Image
screen capture software

User avatar
NNAATZ
1010 crawler
1010 crawler
Posts: 296
Joined: Fri Oct 13, 2006 7:16 am
Location: austin,mn

Post by NNAATZ » Tue Nov 19, 2013 6:39 pm

your loader is in much better shape than mine. it seems to me that u get better view on the henry verses the deere mod. 90. mine was a project that i was going to start this spring and have not got to it yet.... there is always next spring :lol:

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Tue Nov 19, 2013 6:58 pm

I would put a set or rock guards back on it. 5 roller trackframes are prone to bending without rock guards in place, multiplied greatly on a loader crawler.
Lavou
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Cletrac68
40C crawler
40C crawler
Posts: 19
Joined: Sat Nov 09, 2013 9:49 pm
Location: Western PA.

Post by Cletrac68 » Tue Nov 19, 2013 7:47 pm

The rockquards are missing on the right, I'll have to find replacements. Left side track frame has been repaired (welded) at least once. That's quite a bit of weight (2000#'s empty) on those points.

I am going pull off the loader - to do other repars/maintenance. Don't know if I'll be putting it back on.

Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests