350 started

[bent]

It has been a long, cold winter here. Too cold for anything to start if left outside. In the fall I parked my 350 by the shop but had no intentions of starting it. A couple of weeks ago on an unusually balmy (+2C) I was on that side of the shop and walked by it so I hit the start button to see if it would turn over. It turned good so I cranked it for a bit and then quit for a minute - then cranked it again and it fired up! Now what? I figured it to be frozen down because I didn't think to park it on some boards. It let it warm up, got on and tried it and it broke loose. Now what? What would any "JD Crawlers" member do? Go for a spin of course! So I dug out my woodsplitter and hooked it up to the back and went to split some blocks I had cut. Then I made a few snow traps on the driveway. I sure like this little unit.

[/URL]
[/img]