350b wide track for sale in Ontario 12,000

Show us pictures of your JD crawler and attachments.
Post Reply
Scottyb
2010 crawler
2010 crawler
Posts: 565
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

350b wide track for sale in Ontario 12,000

Post by Scottyb » Wed Mar 19, 2014 2:14 pm

I would like to take this out to see what it does in snow, and in my low spots on the acreage.


http://ontario.kijiji.ca/c-ViewAdLargeI ... eere%20350
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Wed Mar 19, 2014 6:50 pm

It looks like a dozer blade on a loader. Are wide track shoes naturally curved?
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Wed Mar 19, 2014 7:19 pm

Hi,

Yes, an added dozer to a loader for sure. No, they are not supposed to be curved. The pads were flat when new. The wide tracks are supposed to be dozer only. That u/c has to be a mess. Wide tracks wear everything a lot faster.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

JWB Contracting
2010 crawler
2010 crawler
Posts: 597
Joined: Thu Aug 27, 2009 10:08 pm
Location: Edmonton, Alberta

Wide track loader

Post by JWB Contracting » Wed Mar 19, 2014 8:20 pm

Yes, you could not order a factory wide track loader. So someone built this from a kit.

With dry steering clutches, I would bet the clutches on a B would slip when turning while pushing a blade full of snow. We had a factory BW serial numbered machine and it couldn't handle 3rd gear snow dozing. And the clutches were in as new shape when we removed the finals in conjunction with converting it to a narrow pad.

The curved pads do make it easier turning on a wide pad and that's what we prefer on our wide track machines. They can get you some incredibly soft and wet terrain. That's where a bigger 3152 engine is needed.
Jason Benesch

John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors

plowboy
40C crawler
40C crawler
Posts: 14
Joined: Fri Mar 14, 2014 2:48 pm
Location: NW Wisconsin

Post by plowboy » Sun Mar 30, 2014 8:36 am

Had a 350B yrs ago with 30" pads. Was just a
6way blade machine. Would practically walk on water. The pads on it were stating to fatigue like the picture so we added a
Second grouser to each pad. Really stiffens them up, and flattened them back out. We would use it for maiming slope work placing topsoil. Really wasnt used for heavy dozing. Amazing the slopes it would stick to.

User avatar
digitup2
350 crawler
350 crawler
Posts: 858
Joined: Tue Feb 05, 2008 6:36 pm

Post by digitup2 » Tue Apr 01, 2014 4:56 pm

The dealer in Waterloo Ontario [Robren Equipment ]built several 350 wide loaders and 8 or 9 wide 450 loaders for specific jobs in the eighty's These were used from truck loading skids of vegetables grow en in soft black earth to loading peat onto dump trucks I know of two 450'sthat had backhoes added to dig darned near any where I ran one for a contractor and it could go places you couldn't even walk on with rubber boots .Digitup.

Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests