New to site with JD350

[keithh]

I'm new to the site and have been doing alot of reading. Posted on the early crawlers board and found out my newly acquired 350 is a '67. Got this in the late fall and need a little work. Fuel drips at the inlet to the fuel pump when it is running, and one of the lift pistons needs repacked. Going to get manuals and i have a local guy that works on his 450 work on mine. I shot a few pix today because the temp is finally about 5 degrees.
Can someone guide me as to how to upload the images. I have them on my web server awaiting instructions. the fuel pump # roosa master
DBGFC 331 13DH [2500] Then below that looks like BB3304 / thanks / keith

[CELSESSER]

Keith,
Go to the Show and Tell page and the first line has to do with posting pictures.
Haven't tried it, Hope it works

Chuck

[jdemaris]

the fuel pump # roosa master
DBGFC 331 13DH [2500] Then below that looks like BB3304 / thanks / keith

That's a common pump and all parts are available. You can buy a complete seal kit for $15.